The S711 is a full frame 1M Pixel camera with 7,360 fps native frame rate
The Phantom S711 provides up to 7 Gpx/sec (56 Gbps) of data throughput for Machine Vision applications. It brings very high frame rates to Machine Vision applications via CXP12 and CXP-over-Fiber.
Demanding and cutting edge machine vision applications benefit from the Phantom S711, a 1 Mpx high speed machine vision camera providing up to 7 Gpx/sec throughput and many ease-of-use and efficiency features. Leveraging CXP-over-Fiber (CXPoF) technology, it uses two simple, easy-to-use fiber cables to carry up to 56 Gbps of images and data to frame grabbers. For highframe rate applications that require just 40 Gbps or less, the S711 can also operate with just 1 fiber cable into 1 frame grabber.
Two Regions of Interest (ROI) are available, increasing efficiency and flexibility. A mechanical shutter and EOS lens compatibility allow remote black referencing and focus control to improve image quality. The S711 also comes with GPIO ports for Trigger and signaling.
Specifications
Sensor
Proprietary 1280 x 800 pixel CMOS
EMVA 1288 measurements at 532nm
Dynamic Range
58.3 dB
Integration Time
Down to 300 ns (FAST option)
Frame Rate
7,360 @ 1280 x 800 (Standard mode)
9,850 @ 1024 x 720 (Standard mode)
9,260 @ 1024 x 768 (Standard mode)
249,080 @ 128 x 16 (Standard HS mode)
(other speeds and resolutions available, please see datasheet)
Pixel Size
20 µm
Standard Mode
Quantum Efficiency: 33.7% mono; 29.1% color
Max. SNR: 44.4 dB
AST (p) 99.0 mono; 113.4 color
Saturation Capacity (e-): 27417 mono; 26842 color
Temporal Dark Noise: 32.79 e-
Special Features
Configurable to stream up to 1/2 capacity (4Gpx/sec) or full capacity (7Gpx/sec)
Selectable 8-bit and 12-bit output
Frame timestamp
IRIG In (modulated and unmodulated)
IRIG Out (unmodulated)
Mechanical Shutter for black reference
2 flexible, programmable Regions of Interest (ROI)
Internal Memory
Dependant on customer storage
Sensor Cooling
TE Cooled
Max record time
Dependant on customer storage
Triggering
Trigger either through Software or GPIO trigger signal
Exposure
1 μs minimum exposure
300 ns minimum epxosure with FAST option
Extreme Dynamic Range (EDR)
Auto Exposure
Image Time Stamp
IRIG, SMPTE or MISP
IRIG in/out (modulated and unmodulated)
Signaling
GPIO
Event In
Trigger In
Memgate
Strobe Out
Trigger Out
Ready
Software Trigger Out
Shutter
Internal mechanical shutter for simple current session reference
Timing
Time code in/out
Standard Video Output
Up to 8 CoaXPress (CXP 12) channels, provided in 2 fiber QSFP+ banks of 4 channels each
Lens Interface
Nikon F, C, or Canon EOS
Camera Control
Gen1Cam compliant
Data Acquisition
National Instruments M- and X-Series DAQ modules with integrated support in PCC
